1. The requirements for the drum of the high angle edge blocking conveyor belt are much higher than those of the flat belt. If the same type of belt is used, the drum model used is larger than that of the flat belt.

2. Baseband

The base belt of the corrugated edge belt conveyor mainly bears tensile force, but its lateral rigidity also plays a significant role in its performance and effectiveness during use. If the rigidity of the conveyor belt is too small, it can cause lateral deformation of the conveyor belt, causing scattering and other phenomena. (For example, using CC-56 cotton canvas core layer conveyor belt, the breaking strength is 56N/mm, the number of core layers is at least 6 or more - including 6 layers, the thickness of the upper cover rubber is more than 4.5mm, and the thickness of the lower cover rubber is more than 1.5mm).

3. The storage and use methods of high angle edge conveyor belts are the same as those of ordinary conveyor belts and heat-resistant conveyor belts.

4. A cover belt should be used for conveyor belts with large inclination angles exceeding 70 degrees (the advantage of using a cover belt is to prevent material leakage and damage to the base belt; at the same time, it can also increase the transportation volume of materials).